Inactive [WGEN] PhoenixTerrainMod V0.8.2 - Now BOBs spawn from saplings[1060]

Discussion in 'Inactive/Unsupported Plugins' started by Matt, Jul 28, 2011.

  1. Offline



    Phoenix Terrain Mod - world generator.

    Version: v0.8.2
    Download at

    Phoenix Terrain Mod is a mod based off of Bucyruss's BiomeTerrainMod. It basically allows you to customize Minecrafts terrain generation to control ore spawns, terrain types, biome size, basically everything. It was continued by R-T-B however he has since discontinued.

    Khorn has decided to continue the mod as Phoenix Terrain Bukkit plugin. Most recently Khorn has partnered with Rebelj12a and to integrate the Phoenix Terrain Community better and provide better support for users of Phoenix Terrain.

    Sponsored by


    Example Images
    Show Spoiler


    What you can control with settings file:
    • Biome sizes.
    • Temperature and moisture limits.
    • Caves generation.
    • World water level.
    • Terrain generation.
    • Tree density.
    • Ores generation.
    • Block replacement.
    • Custom object spawn.
    • Multi world support, config per world.
    How to install:

    Video here

    Step 1: Drop PTMBukkit.jar into the plugin folder.

    Step 2: Modify bukkit.yml in the root folder and add the line

            generator: PhoenixTerrainMod
    Step 3: change the "YOUR_WORLD_NAME" into the name of the world you want to work with.

    Step 4: Save the YML and boot your server.

    Step 5: Go into the newly generated Ini file and adjust accordingly (that is, in your plugins folder look for the new PhoenixTerrainMod folder with corresponding folder to your world and inside the BOB folder & ini file).

    Step 6: Your done!

    Optional Steps:
    These are to follow after Step 6. If you wish to add custom items like the BOB's which are custom style tree's, little island statues, etc, then drop the applicable ones into the Plugins/Phoenix.../"world"/BOB/ folder. World being the name of the world its generating. Once you reboot the server again, it will load those files accordingly and they will generate in your map.

    Additional/Multiverse Steps:
    After you've generated a world via Multiverse. Go into the multiverse folder and look for the worlds.yml. In there, you want to add the below code.
    generator: PhoenixTerrainMod
    To the bottom of the worlds.yml mouthful. This is AFTER you've generated the world, just add it to the bottom line of the entire setup (with proper YML spacing like the rest of the config).

    Settings file:
    This is edited SteelCrow's guide to the PTM settings
    His main post here
    Show Spoiler

    This is my attempt to explain the settings ini file for the PTM (Pheonix Terrain Mod) which is the successor to Bucyruss' terrain mod.

    This guide is accurate as far as I can tell and within my understanding of the settings. I am quite likely in error regarding some things. Feel free to correct me and let me know to update. However, be prepared to be required to provide examples and/or verifications.

    That said, lets begin.

    A quick note about seeds. The seed you use still plays an important part in what your world is like. The settings affect how the seed gets implemented, they do not override or replace the seed. You should generate several worlds with different seeds before deciding whether a set of settings is whast you were trying for or not.

    <All Biome Variables>

    These set the global environmental conditions. Currently they only affect the generation of the world and biomes therein, not the designation overlay that MC uses for weather etc.

    Modifies the size of biomes. Larger values generate larger biomes.
    "This settings affects the average dimension of biomes on a linear scale, so every doubling of this value will quadruple the area of biomes."
    Think of it as sort of a radius multiplier. Setting it to 5 is a huge biome, it'll be a long ways before it changes. 2 to 3 is decent. 100 should be thousands of meters across, maybe tens of thousands.
    The initial 1.5 setting is the normal vanilla biome size setting. Remember that this is a multiplier of the variable sized vanilla biomes.

    Sets the minimum and maximum moisture of the world
    Moisture is a percentage. 1.0 = 100%
    Setting both to the same number or small range will limit the range of biomes generated. (see biome chart) Used to generate only certain biomes types or to exclude biome types by setting the ranges appropriatly when used in conjunction with the tempurature settings

    Sets the minimum and maximum temperature of the world.
    Again a percentage expressed as 1.0 = max temp.
    Used the same way as the moisture settings.

    The tempurture vs moisture biome diagram:

    Those are the default settings. Settings range is -1 to +1. smaller (and neg) numbers mean less chance of snow and ice, higher means greater chance.
    I don't know how accurate this is given that Notch played with the snow and ice regeneration part of the algorithm. Before 1.6.6 the ice wouldn't regenerate, now it will. This may now only set the INITIAL conditions and nothing more. I haven't had the chance to test it yet.
    There is also a sort of biome overlay in MC that PTM attempts to adapt. Untested at this time.

    <Swamp Biome Variables>

    Places a strip of mud or clay (size is dependent on the swampSize setting number) around the edge and below surface water. This will only occur in swampland biomes. The muddySwamp setting takes priority over the claySwamps setting.

    <Desert Biome Variables>

    Will remove all water from desert and ice desert biomes.
    If you set your temperature and moisture settings to generate a desert world, making waterlessDeserts:true will result in the only surface water being in notch ponds. Setting notch ponds to false will result in the only water being in underground lakes and streams.

    Will remove all dirt from the surface of deserts. This setting was introduced because changing some terrain generation settings will cause dirt to erroneously appear on the surface of desert biomes.

    Will turn on the ability to let dirt appear on the surface. This setting occurs after removeSurfaceDirtFromDesert so turning both on will cause dirt to appear in your desert biomes.

    Sets the frequency at which dirt will appear in the desert. The setting corresponds to the average number of chunks before a dirt block will appear. Example: setting desertDirtFrequency:100 means that, on average, you will encounter one dirt block every 100 chunks in the game.

    <Cave Variables>

    This controls the odds that a given chunk will host a single cave and/or the start of a cave system.

    The number of times the cave generation algorithm will attempt to create single caves and cave systems in the given chunk. This value is larger because the likelihood for the cave generation algorithm to bailout is fairly high and it is used in a randomizer that trends towards lower random numbers. With an input of 40 (default) the randomizer will result in an average random result of 5 to 6. This can be turned off by setting the "even cave distribution" setting (below) to true.

    Setting this to true will turn off the randomizer for cave frequency (above). Do note that if you turn this on you will probably want to adjust the cave frequency down to avoid long load times at world creation.

    Sets the minimum and maximum altitudes at which caves will be generated. These values are used in a randomizer that trends towards lower numbers so that caves become more frequent the closer you get to the bottom of the map. Setting even cave distribution (above) to true will turn off this randomizer and use a flat random number generator that will create an even density of caves at all altitudes.

    The odds that the cave generation algorithm will generate a single cavern without an accompanying cave system. Note that whenever the algorithm generates an individual cave it will also attempt to generate a pocket of cave systems in the vicinity (no guarantee of connection or that the cave system will actually be created).

    The number of times the algorithm will attempt to start a cave system in a given chunk per cycle of the cave generation algorithm (see cave frequency setting above). Note that setting this value too high with an accompanying high cave frequency value can cause extremely long world generation time.

    This can be set to create an additional chance that a cave system pocket (a higher than normal density of cave systems) being started in a given chunk. Normally, a cave pocket will only be attempted if an individual cave is generated, but this will allow more cave pockets to be generated in addition to the individual cave trigger.

    The minimum and maximum size that a cave system pocket can be. This modifies/overrides the cave system frequency setting (above) when triggered.


    <Terrain Variables>
    Sets the water level of the world. Also depends on there being water to lower. See the moisture settings.

    If this value is greater than 0, then it will affect how much, on average, the terrain will rise before leveling off when it begins to increase in elevation. If the value is less than 0, then it will cause the terrain to either increase to a lower height before leveling out or decrease in height if the value is a large enough negative.

    This is supposed to control height of the land. Has been 'broken' in the past. A high number will give you very sharp cliffs and high plateaus. It's easy to have the land end up at the max height level by accident. Experiment in small increments. Also it's dependant on the world seed used.

    If this value is greater than 0, then it will affect how much, on average, the terrain (usually at the ottom of the ocean) will fall before leveling off when it begins to decrease in elevation. If the value is less than 0, then it will cause the terrain to either fall to a lesser depth before leveling out or increase in height if the value is a large enough negative.

    May be 'broken'. Seems to control the underwater slope/roundness to the bottom of the oceans. A high number will result in sudden sharp plunges to max depth. (good for underwater worlds) High numbers will effectively remove all beaches and shoals.

    Be aware this can affect 'valleys' as well. It may in some circumstances raise land if negative.

    Can increase (values greater than 0) or decrease (values less than 0) how much the landscape is fractured horizontally.

    Think of this as how often a horizontal line is fractured. That's not accurate as far as what is happening but it does let you grasp the nature of what this does. The higher the number the more fractures. Think of it as continents being smashed into smaller bits. Increase for archipelagos decrease for continents. (not accurate, but allows you to grasp the general function)

    Negative fractureHorizontal should stretch out terrain features and make for smoother, flatter terrain.

    Can increase (values greater than 0) or decrease (values less than 0) how much the landscape is fractured vertically. Positive values will lead to large cliffs/overhangs, floating islands, and/or a cavern world depending on other settings.

    This controls how often the vertical 'line' fractures. As the vertical height limits the number of visible fractures this setting doesn't always seem to effect much change. This is the setting that will give you plateaus and floating islands and the overhangs, undercuts and arches. A setting about 5 should get you floating islands.

    Negative fractureVertical values should smooth out terrain features such as the sides of things like hills and cliffs.

    Can sometimes create lag when it generates a massive underground vault near bedrock. Especially with large cave complexes.

    Fracture is applied near the begining of the terrain generation and affects the basic shape and nature of the land.

    Hard to explain, but think of these as terrain chaos settings. The larger the values the more chaotic/volatile landscape generation becomes. Setting the values to negative will have the opposite effect and make landscape generation calmer/gentler.
    Another way to think of them is the amount of noise added to the general terrain shape.

    Adjust the weight of the corresponding volatility settings. This allows you to change how prevalent you want either of the volatility settings to be in the terrain. Values should be between 0 and 1 and sum to some number equal to or less than 1. An example would be to set volatility1 to something high and volatility2 to some negative number. Then adjust volatilityWeight1 to a small number (say 0.1) and volatilityWeight2 to a larger number (0.85). This should result is mostly calm/flat landscape with the occasional chunk of terrain floating or jutting into the air.

    Volatility is applied near the end of the terrain generation and essentially affects the roughness of the base terrain.

    If you want flat land with rare but violent cliffs, you would have low horizontal fracture, and one volatility at 0 and the other one high, like 5+ (or more!) with a low weight, like .05 or something. Remember the weights may add up to no more than 1. I assume the unused % of the weigh allows the seed to generate nuetrally with no application of either volatility..

    Removes the bedrock form the bottom of the map.
    Turns the bedrock layer into a single, flat layer one block thick.
    Turns all bedrock into Obsidian


    <Replace Variables>
    Attempts to replace all surface stone with its nearest non-stone neighbor block type (dirt, grass, sand, gravel, or clay). If it cannot find a suitable neighbor block to duplicate, then it will default to Sand in Desert biome types and Grass in all others.

    Will replace blocks after any generation. Use block Ids to select blocks.

    Replace any gravel to sand.
    ReplacedBlocks :13=12,17=20
    Gravel to sand and wood to glass.

    <Cactus&Tree Variables>
    Use Bob objects during world generation
    Untested. Not sure myself.
    determines whether vanilla trees spawn or not.
    Sets the global, starting tree density for all biomes. Increasing the value increases the density of trees in all biomes.
    Sets the tree density in each biome individually. Large negative values are used to prevent trees from spawning at all.
    (untested that the variable range is between 1-8, with -20 guaranteeing no trees spawn.)
    (untested; tree density rates are bypassed by the bob object placement of bob trees)
    These settings adjust the creation variables for cacti.

    <Lava Pool Variables>
    The levels at which any caves are filled with lava (initialy the bottom 10 layers near bedrock)

    <Underground Lake Variables>
    Enables underground lakes.
    Allows underground lakes to spawn in the air.
    These settings adjust the creation variables for underground lakes.

    < Above Ground Variables>
    Pretty self-explanitory.
    Frequency is the number of times, per chunk, that the game will try to make a placement.
    Rarity is the odds (out of 100) that the game will actually make each placement.
    The above settings mean that yellow flowers will occur twice per chunk. (2x100%)
    Roses will show up on average once per two chunks (1x50%)
    Brown mushrooms once per four chunks (1x25%)
    Red mushrooms about once every seven chunks (1x13%)
    Reeds, ten per chunk (10x100%)
    Pumpkins, once per thirty-three chunks. (1x3%)
    Remember that the spawn requirements must also be met. So if there's no dirt next to water the reeds will not spawn all 10, only what can.
    Pumpkin settings are for a pumpkin patch (So I believe, haven't tested).
    <Above/Below Ground Variables>
    Changes the water source spawning algorithm to a flat distribution. Normally, water sources are distributed with a higher frequency toward the bottom of the map.
    Water and lava sources are the single source blocks that create waterfalls and lavafalls, both above and below ground.
    The numbers seem high to me, but I think there are spawn conditions that result in the majority of the placement attempts being aborted. I've never seen a single water source placed in a cave ceiling or be buried in a wall. I assume then that they need to have the placement location open on one side with a minimum volume of air to spawn. So while the above settings seem like waterfalls will happen fifty times per chunk (50x100%) they actually occur far less frequently.

    Setting it to true will remove those surface ponds of lava and water.
    <Below Ground Variables>
    These 'ore' deposit settings are all alike and will be explained together. The initial settings are the vanilla MC settings.
    "Frequency is the number of times, per chunk, that the game will try to make a deposit.
    Rarity is the odds (out of 100) that the game will actually make a deposit."
    Using the Lapis as an example; What it means is that the world generator is always going to try to place one deposit of lapis per chunk (DepositFrequency). Each try has 100% chance of happening (DepositRarity). And that placement will be from 1 to 7 blocks of Lapis (DepositSize).
    So in a single chunk these settings can spawn anywhere from 1 to 7 blocks of Lapis.
    If the Deposit Frequency was changed to 5, it could spawn anywhere from 5 to 35 blocks of Lapis. This is PER CHUNK. 35 Lapis in a single chunk is one lapis in every 5x5x5 block in the 16 layers available with these settings. And it will occur like that in each and every chunk in the world. There would be far more lapis around than you would ever be likely to use.
    I personally don't like simply increasing these settings as it makes the survival game far too easy. However coupled with the additional three sets of settings for each ore can make for interesting distribution patterns.
    There are four deposit setting per ore. What this allows [with a little creativity] is multiple variations in the sizes and locations of ores.
    For example;
    These two settings will produce iron as normal, plus because of the use of the rarity2 (etc) settings, it will once per 100 chunks (on average) produce an additional iron deposit of between 1 to 30 blocks. A 'vein' of iron ore per se., deep down.
    Another example;
    These will produce some unusual effects.
    Set one will produce the usual vanilla distribution of gold. There will always be two deposits of 1-8 gold per chunk.
    Set two will deposit a single grouping of 1-16 gold just below sea level, but only once in every 20 chunks. It's likely that some of it will be replaced with ocean so you'll often find these lying in the deeper areas of water, when you don't find them in caves or solid rock. Keep in mind that if you drop your sea level they can be exposed on the surface.
    Set three will usually, but not always manage to deposit a regular sized deposit of gold high up on mountains. There has to be a mountain high enough there for this to happen. But if there is this set will probably place one there.
    Set four will produce an 'gold ore rich' layer across the entire world (as each setting affects every chunk in the world) it'll place 1-2 gold in the two layers allowed about 5 times per chunk. a single 16x16 layer is 256 blocks in total. So it'll be 1-20 gold in that layer. But it'll be wherever there is stone crossing those layers.
    Because all four different settings were used all four will occur together. Keep that in mind as these four together will produce anywhere from 10-60 gold per chunk. In vanilla there is usually only 2-16. So using all four together can lead to excessive amounts of ores.
    A word of caution. When determining deposit sizes remember to leave room for everything else. Stone, dirt, sand, water, the other deposits, etc. It's easy to go overboard with random settings and overload the chunks. You can essentially overwork and freeze the program with too many deposits and a lot of large deposits as it'll try to fit it all into the single chunk.
    Making ten deposits of 200 blocks of ore per chunk can fill about 15 layers of each and every chunk with that ore.
    Also a lot of deposits attempts will most certainly slow down chunk generation. Expect a great deal of lag and crashes may occur if you set these excessively.

    • /ptm - available commands
    • /ptm reload - reload configuration for your world.
    • /ptm biome - show what biome in your location.
    • /ptm list [page] - List bob plugins for this world
    • /ptm spawn BOBName - Spawn bob to specified place
    More screenshots from setting share thread:

    Show Spoiler







    Known bugs:
    • Above ground objects regen wrong some times. (Mainly trees)
    -fix: bo2 all biome
    -fix: bo2 half spawn
    - Added grow from sapling
    - Added spawn command.
    - Added DefaultSettings.ini on start
    - Added Default BOBPlugins folder on start
    - Added BOB list command for world
    - Fix custom objects biomes.
    - Fix dungeon settings.
    - Add check command.
    - Add waterBlock settings - block id of sea water.
    - Add ceilingBedrock settings - bedrock on top layer.
    - Add disableNotchHeightControl - when enabled terrain generate on full map,
    without height factor.
    - Add CustomHeightControl - list of custom height factor, 17 double entries, each entire control of 7 blocks height from down. Positive entry - better chance of spawn blocks, negative - smaller.
    - Forgot to add copying from old folders to new, sorry.
    - Add reload and biome commands.
    - Better replacement, some fix with plugin init.
    - Fix underground lakes.
    - Remove oldgen.
    - Fix flowing bug.
    - Fix replacement.
    - Some code clean up.
    - Fix regen and may be wrong generation after restart.
    - Convert older bukkit version to be a plugin.
    External links:
    Original authors: R-T-B, Bucyrus

    Bukkit version author: Khorn
  2. Offline


    after a bunch more testing, I can dictate my issue is indeed a bug.

    If you modify 'land size' in the config.ini, let's say... to 8, biomes will spawn with very little 'ocean water' around or in them unless it's an actual ocean biome, yet it WILL NOT increase the height (compared to sea level) of the biome.


    Plains biome.
    config.ini landsize: 8
    Biome land size: 0
    average height: 64-68
    ocean water content: could not find any.

    Yet if I do this...

    Config.ini landsize: 4
    Biome land size: 0.8
    average height: 74-85
    Ocean water content: None, but entire biome is 'uplifted' above the Ocean by a very large margin while retaining its flatness.

    So it seems your biome land-size doesn't work right, as it increases the average HEIGHT of a Biome, as well as size, where the config.ini landsize only modifies the actual size of the biome, NOT uplifting the height of biomes at all.
  3. Offline


    I was under the impression that PTM could be made to generate the actual snow blocks in Taiga (no reason why this shouldn't be possible since, I believe, /give commands properly generate them). The problem would merely be inability to replenish them because PTM cannot force it to snow (the weather event "snow").
  4. Offline


    When I do everything it says, even without changing the default .ini file, everyone just gets an internal server error when entering the server... can anyone help? is this supposed to work with 1.8.1.?
  5. Offline


    Are you sure you're using the latest version (which is not 0.8.2 but, rather, 0.9.6)?
  6. Offline


    Thanks alot, mdraw! Didn't realize that. Now the plugin is up and running! Can anyone quickly explain how to use it though? I mean, I'm guessing I have to use it AFTER I've already created my world, but will it then update my current world? As a test, I made a new world, activated the plugin. The PTM files appeared, I turned off the server, changed the desertbiome file in my ptm/worlds/myworld folder so that no cacti spawn, yet when I turned the server on and went to the desert, it was still full of cacti...
  7. Offline


    Now that you have the PTM plugin folder, erase the following folders:
    1) plugins/PhoenixTerrainMod/worlds
    2) world (or whatever you named your world)

    Now change defaultconfig.ini and the biome inis in plugins/PhoenixTerrainMod to whatever settings you fancy. When you generate a new world it will copy defaultconfig.ini and the biome inis and use those to generate terrain. Pre-existing terrain will not be altered, so you can't do what you did (i.e., reduce cacti frequency to 0 and expect cacti in already-generated deserts to disappear).

    Remember to set bukkit.yml to use the PTM generator for the world(s) for which you'd like to use it.
  8. Offline


    bcouse my friends friend hasn't got the real version...

    TNX :D

    still not working can u upload ur bukkit.yml???

    EDIT by Moderator: merged posts, please use the edit button instead of double posting.
    Last edited by a moderator: May 18, 2016
  9. Offline


    Can someone help me and explain me how to make these floating islands ? ><
  10. Offline


    Khorn has a great post on the prior page explaining in excruciating detail how to create the floating islands.
  11. Offline


    @IownYourFinger That post wasn't directed to you. Sorry for the confusion.
  12. Offline


    One small question, how do I disable the generation of ocean's? Because currently biome chance is set to 0 but still there are massive oceans, and it kinda ruins te feel of a desert world.

    Also, is there a way to replace stone with sandstone up to a certain depth? Cause I want a big layer of sandstone, but I still want the bottom layers where ore's will spawn to be smoothstone?

    Also, why are there multiple frequencies for undergroud deposits? I kinda fail to understand the use of ( for example ) 4 different dirt entries.
  13. Offline


    @Drexl k sorry :D but can u upload ur server? (so i can paste it into my server :D)
  14. Offline


    I'm a bit occupied by my 6 yr wedding anniversary atm, but perhaps when I get back. Although I advise against just copy/pasting settings. You don't learn anything from that experience. Always make sure to learn how something works so you'll know what to do when you innevitably need to change/fix something in the future.
  15. Offline


    You can set rarity and a range for each ore frequency. I use it to make coal generate in larger deposites at higher altitudes and to add an extra diamond layer between 120 - 128. :p
    btw @Khorn I was wondering if you can set a range to remplacing blocks.
  16. Offline


    Try setting your desert chance to a very large value and change the land size in the main config.

    Also, there is a good breakdown of the different deposit settings and how they can be used if you expand the first (settings file) "spoiler" in the original post and read through that a bit.

    Hope that helps.
  17. Offline


    Oh so many questions ..
    About oceans - set landSize=10 in main world ini

    About replace - now you may choose replace only all blocks in one chunk in one biome .. i will think about height settings

    You can place big deposits in depths and small near surface .. something like this

    Copy code from step 2 in this thread first post and paste in your bukkit.yml

    You mean height range ?
    I found problem with bo2 objects on pregenerated maps ..
    It is not bug :confused: ... When you generate map with some mods it takes some time .. and when night coming objects with "spawnDarkness=False" - not spawning ..

    Also i found bug with this damned half trees..
    Hopefully i fix this ..
  18. Offline


    Hi, I know this may not be the correct thread to complain about the .schematic to .bob converter webhosting being down, but I was wondering if someone had a recent version of it that they could send me? Once again, anyone that has the most recent version of the .schematic to .bo2 converter it would be greatly appreciated if you could pass it on.

  19. Offline


    @Khorn Yes, height range. Right now I have to resort to replacing gravel with IC2 ores in certain biomes, but it would be great if you can set height ranges to the replacedblock feature. What would be even more awsome is if you could make custom deposites as in setting a block id for our own set of deposites. So instead of having 3 extra, or being limited to 4 deposite settings for each deposite type, we can make as many as we want out of whatever block type we want. :D Just a suggestion...
  20. Offline


    I tried to find any info how "disableNotchHeightControl" works and what each of 17 numbers means but no luck, therefore im at your mercy. If anyone knows how it works i would be grateful.
  21. Offline


    @Khorn, i already did but it's still not working :(

    @Drexl yeah sorry, but i can't get it working (i thought when some1 gives me the bukkit.yml i can notice what i did wrong :D)

    EDIT by Moderator: merged posts, please use the edit button instead of double posting.
    Last edited by a moderator: May 18, 2016
  22. Offline



    I've tried two different hosts, and I've discovered that PTM is actually the source of a recurring crashing problem I've been having. I'm glad I finally go PTM to work, but now that it is my server crashes within seconds of doing anything on a PTM generated world (including just spawning into it). I know that isn't very useful to you. I'll try to get you some server logs later, but I'm incredibly tired right now and must sleep.

    EDIT by Moderator: merged posts, please use the edit button instead of double posting.
    Last edited by a moderator: May 18, 2016
  23. Offline


    @Drexl doesn't work... still having error (yes i changed the world name and deleted the other 2... :(
  24. Anyway to make undergroud Huge Cave Systems World? Can be flat on surface.
  25. Offline


    I have a custom biome set up, and i was wondering how i would go about getting "generic" trees to spawn within it.
    Secondly is it still possible to control the temperatures of biomes ? ie, make my custom one hot/cold ?
    Thanks x

    Ps, Mad props to Khorn for keeping this alive
    I share with you my mystic biome :)
  26. Offline


    I've attached my worlds folder, completely zipped. This will generate an entirely underground world with a ceiling and floor of adminium.

    Here's a great screenshot from that world config;

    Attached Files:

    Last edited by a moderator: May 18, 2016
    Lathanael likes this.
  27. Thanks, now i have a setting to toy with and see which seeting affects what, concerning undergrond worlds ;)
  28. Offline


    Hey, i got everytime an error:
    15:51:26 [INFO] This server is running Craftbukkit version git-Bukkit-0.0.0-1126
    -g35eac7a-b1317jnks (MC: 1.8.1)
    15:51:26 [INFO] PhoenixTerrainMod v0.8.2 is now enabled
    15:51:26 [INFO] Preparing level "world"
    15:51:26 [INFO] Default game type: 0
    15:51:26 [INFO] PhoenixTerrainMod: settings for 'world' loaded
    15:51:26 [INFO] PhoenixTerrainMod: enabled for 'world'
    15:51:26 [SCHWERWIEGEND] Could not pass event WORLD_INIT to PhoenixTerrainMod
    java.lang.NoClassDefFoundError: net/minecraft/server/NoiseGeneratorOctaves2
            at com.Khorn.PTMBukkit.Generator.BiomeManagerPTM.<init>(BiomeManagerPTM.
            at com.Khorn.PTMBukkit.PTMPlugin.WorldInit(
            at com.Khorn.PTMBukkit.Listeners.PTMWorldListener.onWorldInit(PTMWorldLi
            at org.bukkit.plugin.RegisteredListener.callEvent(RegisteredListener.jav
            at org.bukkit.plugin.SimplePluginManager.callEvent(SimplePluginManager.j
            at net.minecraft.server.MinecraftServer.a(
            at net.minecraft.server.MinecraftServer.init(
    Caused by: java.lang.ClassNotFoundException: net.minecraft.server.NoiseGenerator
            at$ Source)
            at Method)
            at Source)
            at java.lang.ClassLoader.loadClass(Unknown Source)
            at java.lang.ClassLoader.loadClass(Unknown Source)
            ... 10 more
    Did someone know the problem???
  29. Offline


    The problem is that you're using an old version of the plugin - Khorn hasn't updated the OP to link to the latest build. Here is the files list, you want build 0.9.6.
  30. Offline


    Actually, his OP still links to 0.8.2, and the title of the thread hasn't been changed in awhile. It caused a great deal of confusion for me initially. I don't think I ever posted about it because I just assumed he'd change the post when it was updated. Eventually I figured out that his bukkit dev WAS updated, but the link here took you to the 0.8.2 release and not his main bukkit dev page.
  31. Offline


    i know this is not big issue, but i never seem to get Roses to spawn, anywhere. Flowers and grass are fine!
    Even with settings on Max, they never appear!

Share This Page